There’s more to dash camera installation than just mounting it to your vehicle’s windshield or dashboard. In order to get a clean, professional-looking setup, there are a few key tricks to keep in mind.
The most important thing is to position the camera in a way that it doesn’t block your view of the road ahead. The ideal place is somewhere high on the windscreen and below the rearview mirror.
Image credit: https://www.gadgetcity.com.au/blog/top-5-reasons-why-you-need-a-dash-cam-in-your-car/
Use a Power Splitter
Powering your dash cam can be done in one of two ways: either through the cigarette lighter socket or by connecting directly to an OBD-II port. The downside is that these connections are obtrusive, and running the cables around your car can be tedious. You may be able to avoid the clutter by permanently connecting your camera’s power to a 12V circuit that powers other accessories (inverter, battery chargers, streaming cams, etc).
Adding a Power Splitter
A power splitter, or power divider, is a component used to divide an input signal into multiple output signals. It is a reciprocal component, so it maintains the characteristic impedance of the input.
It is a great way to divide the power coming into your camera. It will also help you make sure that the wiring doesn’t clog up the cigarette lighter outlet.
Another good reason to use a power splitter is that it will prevent your camera from draining your car’s battery when you enable parking modes or always-on surveillance. Most of these features will turn off the camera if they sense that it’s running on low voltage. This can leave you stranded if you’re in an accident and your vehicle runs out of power.
You can find a variety of different types of power splitters on the market, so be sure to do your research before buying one. You’ll want to select one that can provide enough power for your camera and other devices, and it will need to be rated at a high enough voltage to safely work in your vehicle.
If you choose to use a Y splitter, use flexible cable ties to secure it under your dashboard and keep any slack from hanging out of the footwell. You can also wrap the Y splitter with a piece of electrical tape for extra support.
You should also be sure to disable any event detection functions that protect the current video file from being written to if something trips your g-sensors. These functions are incredibly sensitive and will trigger even a tiny crash. They will also eat up your memory card’s available space, which will shorten the camera’s recording loop.
Don’t Hang It Down
It’s a safe bet that a dash cam will wind up on your dashboard at some point, so it’s only natural that you want to make sure it’s installed in the best possible way. It is important to pay attention to detail if you want a dash cam that lasts a long time, but it also helps to keep the installation process as painless as possible.
Image credit: https://www.supertechtt.com/1080p-fhd-car-dash-camera-car-camera-recorder-3inc.html/
There are a lot of things to consider when installing the best dash cam around, including power and battery choices, mounting options and more. Getting it in the right place at the right time can make all the difference between a well-documented incident and a serious blow to your credit rating. Here are some of the best dash camera best practices to help you achieve your safety goals. It’s a good idea to experiment with various mounting methods before settling on one for the best fit and finish. Using the appropriate adhesive can also make or break a good dash camera installation. Lastly, don’t forget to read the user manual before trying to fiddle with the nitty gritty of the install.
Mount It High
If you’re looking to install a dash camera, then you need to make sure it’s placed in the right spot. The location you choose can affect the quality of your video footage and the overall look of your setup. Here are some tips and tricks to help you get it right.
Mounting your dash camera high is the best way to ensure that it can capture every detail in front of it. This will enable you to record any incident that happens on the road, and you can be sure that your footage is clear.
It’s also a great way to avoid false allegations by the police, and you can use it to show them that you are not at fault for any accidents that happen while you’re driving. This way, you can keep your driving history clean and your insurance premium low.
You should always read the instructions on your dash camera carefully before mounting it. Depending on the model, you may need to follow a specific procedure to place it properly.
This is especially important if you want to get the most out of your footage and capture everything that happens in front of it. You can also position the camera in a way that allows you to see the entire field of vision, including the surrounding scenery.
For this reason, it is recommended that you mount your dash cam at a height of about 1.2 metres above the windscreen. This will allow you to get a better perspective on the road and it will also help prevent any glare from affecting your image.
To find the right position for your dash camera, take a look at the manufacturer’s guide or try out a few different places to see what works best. You should be able to position the camera easily, and you should also have access to the power cable.
Image credit: https://www.firstcar.co.uk/driving/should-i-get-a-dash-cam/
Most dash cameras have suction cups or double-sided tape that you can stick them to. Using these makes it easy to get your dash camera installed without any hassle, and you can adjust the position whenever you need to.
Don’t Forget the Battery
Dash cameras are an increasingly popular option for drivers who want to monitor events on the road or record footage of an accident that has occurred. They can also be used to protect against speeding tickets or reduce insurance premiums.
Most dash cams are simple to install: you simply mount the device on your car’s dashboard or windshield, connect it to 12-volt power (typically via a cigarette lighter socket), and insert a MicroSD card for storing your video footage. Many models even include a built-in SD card so you don’t need to buy a separate one.
The most important thing to remember when installing a dash camera is to not forget about the battery. You don’t want to risk running out of power in the middle of your recording session or having the camera fail during an incident, so make sure you have enough power for the duration of your trip.
To keep your vehicle’s battery from draining, it is best to use a hardwire kit like the ROVE 3-Lead Hardwire Kit. These kits provide a constant power supply to your camera from your car’s battery and help regulate the flow of power to avoid draining it completely.
Image credit: https://blog.photojournalist-tgh.tv/photography/70mai-dash-cam-omni-gives-all-seeing-eye-for-your-car
This is especially important if you are using your dash cam for parking mode, as it will need to be constantly connected to the battery in order to work properly. You can also use a cigar lighter socket as a backup power source, but this will not work in all vehicles.
You can also purchase a hardwire adapter, which you can plug directly into the camera’s power port. This is the most convenient way to run your dash camera, but you should be aware that it will drain the battery over time.
Another important tip to keep in mind when you are installing a dash camera is to ensure it can record in Full HD. While 4K video might seem like a necessity, it can be incredibly expensive and fill up the memory on your dash cam quickly. In most cases, you will need a standard-format SD card with at least 64GB of storage space to get good quality video.